Hydrological Monitoring
Monitor water level, flow and rainfall across rivers, reservoirs and managed waterways.
Explore ApplicationsDifferent waterways.
Different measurement needs.
Rivers, reservoirs, canals and flood-sensitive locations each require observations selected for their conditions and purpose.
Rivers & Streams
Observe changing water levels and, where the measurement method permits, characterize streamflow across a defined river reach.
Reservoirs & Storage
Monitor water-surface elevation in managed storage environments, with reference levels and site conditions established for the application.
Irrigation Canals
Measure levels and evaluate suitable flow-monitoring approaches within engineered channels and water-distribution networks.
Flood-Stage Observation
Track changes in water level alongside relevant rainfall observations at flood-sensitive monitoring locations.
Rainfall provides context.
Water levels reveal the response.
Rainfall and catchment conditions provide context for changes observed downstream. The timing and magnitude of that response depend on the waterbody and its surroundings.
Rainfall observations describe input at their measurement locations. Rainfall can vary across the catchment.
Infiltration, storage, antecedent wetness and water management can alter the response. No fixed travel time or rainfall-to-level relationship is implied.
Water level is not water discharge.
Level describes water-surface height. Velocity describes movement. Discharge expresses the volume passing a channel section per unit time.
h · metres
A height, tied to a reference.
Water level is the height of the water surface relative to a defined datum. It is not necessarily the depth above the riverbed.
Maintain the reference through surveys and site checks so observations remain comparable over time.
v · metres per second
Movement varies across the channel.
Velocity describes how fast the water moves. A single point or surface observation may not represent mean velocity through the whole section.
The dotted circles show flow toward you. Their different sizes indicate spatial variation, not measured values.
Q · cubic metres per second
Volume passing the whole section.
For a velocity–area approach, discharge combines wetted cross-sectional area with representative mean velocity normal to that section.
Q = A × v̄
Area × mean velocity. The highlighted area and subdivisions illustrate why channel geometry matters.
Discharge may require representative mean velocity, channel geometry, a validated stage–discharge relationship or another appropriate method. A level reading alone does not establish discharge.
The site determines the sensing method.
Channel geometry, mounting access, environmental exposure and measurement objectives influence the choice of contact and non-contact instrumentation.
Non-contact · electromagnetic ranging
Radar Level
Non-contact distance measurement from a defined mounting position to the water surface.
- Engineering consideration
- Establish the mounting elevation and suitable clearance. Check the beam footprint, obstructions and expected surface conditions.
Non-contact · acoustic ranging
Ultrasonic Level
Acoustic ranging for level measurement where installation and environmental conditions are suitable.
- Engineering consideration
- Allow for the instrument’s blanking distance and the acoustic path. Temperature, condensation, foam and turbulence can influence suitability.
Contact · hydrostatic pressure
Pressure-Based Level
Water-depth estimation from pressure, with reference and compensation requirements considered.
- Engineering consideration
- Account for atmospheric pressure and water density as appropriate to the method. Establish the sensor elevation and protect it from sediment and debris.
Flow · site-specific hydraulic methods
Velocity & Discharge
Flow measurement or estimation using suitable velocity observations, channel information and site-specific hydraulic methods.
- Engineering consideration
- The acoustic profiler shown is one possible approach. Representative sampling, surveyed geometry and appropriate validation determine how observations become discharge.
From the water’s edge to a reliable record.
A hydrological station brings together sensing, mounting, power, data acquisition and communication to create a usable observation record.
Reference checks
Relate readings to established reference levels and record changes to the installation.
Power & communication
Plan continuity and document interruptions; a missing observation should remain visible.
Changing site conditions
Review vegetation, sediment, debris and channel changes when interpreting observations.
Planning a hydrological monitoring system?
Tell us what you need to measure, where the system will operate, and what record you need.