WindSensor P2546D-OPR Anemometer
MEASNET-calibrated precision cup anemometer for IEC-compliant wind-resource and power-performance measurement, offering a 0–75 m/s range, sub-0.3 m/s starting threshold and low-inertia response.
Typical Applications
- Wind resource assessment
- Wind-turbine power-performance testing
- Wind-farm site assessment
- Meteorological stations
- Onshore wind measurement
- Offshore wind measurement
- Met-mast installations
- Wind-energy research
- Long-term wind monitoring
- Professional measurement campaigns
Product Enquiry
WindSensor P2546D-OPR Anemometer
MEASNET-calibrated precision cup anemometer for IEC-compliant wind-resource and power-performance measurement, offering a 0–75 m/s range, sub-0.3 m/s starting threshold and low-inertia response.
Typical Applications
- Wind resource assessment
- Wind-turbine power-performance testing
- Wind-farm site assessment
- Meteorological stations
- Onshore wind measurement
- Offshore wind measurement
- Met-mast installations
- Wind-energy research
- Long-term wind monitoring
- Professional measurement campaigns
The WindSensor P2546D-OPR Anemometer is a precision MEASNET-calibrated cup anemometer designed for professional wind-resource assessment, wind-turbine power-performance testing and meteorological monitoring. Each sensor is individually calibrated in accordance with IEC 61400-12-1 and combines a low starting threshold, short distance constant, negligible overspeeding and symmetrical aerodynamic geometry for reliable measurement under changing wind conditions. The P2546D-OPR uses a magnetic electronic switching circuit to generate an NPN open-collector frequency output proportional to wind speed, while its rugged anodized-aluminium, stainless-steel and GRP construction supports demanding onshore and offshore installations.
Key Features
- Individually calibrated to IEC 61400-12-1
- MEASNET calibration methodology
- 0–75 m/s measurement range
- Starting threshold below 0.3 m/s
- Short 1.81 ± 0.04 m distance constant
- Negligible overspeeding
- Symmetrical aerodynamic geometry
- Angular response largely independent of wind speed
- One-piece rotor anemometer head
- Magnetic switching measurement principle
- NPN open-collector frequency output
- 45–55% output duty cycle
- -40°C to +60°C operating range
- Lightweight 0.36 kg construction
- Suitable for onshore and offshore wind measurements
Every unit is run-in for 225 hours at 9 m/s before final testing. Ammonit explains that this reduces initial bearing friction toward its steady-state level before calibration and field use, which is especially valuable for long-term wind-resource campaigns where calibration stability matters.
Product Models

P2546D-OPR
- WindSensor P2546D-OPR Cup Anemometer
- Ammonit order number S16300C
- Individually calibrated compliant with IEC 61400-12-1
- Wind speed measurement range 0 to 75 m/s
- Starting threshold below 0.3 m/s
- Calibration slope approximately 0.620 m
- Calibration offset approximately 0.21 m/s
- Distance constant 1.81 ± 0.04 m
- NPN open-collector frequency output proportional to wind speed
- Output duty cycle approximately 45 to 55%
- Maximum switching voltage 30 V
- Maximum recommended switching current 10 mA
- Operating temperature range -40°C to +60°C
- Overall height 282 mm with 188 mm swept rotor diameter
- 0.36 kg construction using anodized aluminium stainless steel and GRP
The WindSensor P2546D-OPR Anemometer is a precision MEASNET-calibrated cup anemometer designed for professional wind-resource assessment, wind-turbine power-performance testing and meteorological monitoring. Each sensor is individually calibrated in accordance with IEC 61400-12-1 and combines a low starting threshold, short distance constant, negligible overspeeding and symmetrical aerodynamic geometry for reliable measurement under changing wind conditions. The P2546D-OPR uses a magnetic electronic switching circuit to generate an NPN open-collector frequency output proportional to wind speed, while its rugged anodized-aluminium, stainless-steel and GRP construction supports demanding onshore and offshore installations.
Key Features
- Individually calibrated to IEC 61400-12-1
- MEASNET calibration methodology
- 0–75 m/s measurement range
- Starting threshold below 0.3 m/s
- Short 1.81 ± 0.04 m distance constant
- Negligible overspeeding
- Symmetrical aerodynamic geometry
- Angular response largely independent of wind speed
- One-piece rotor anemometer head
- Magnetic switching measurement principle
- NPN open-collector frequency output
- 45–55% output duty cycle
- -40°C to +60°C operating range
- Lightweight 0.36 kg construction
- Suitable for onshore and offshore wind measurements
Every unit is run-in for 225 hours at 9 m/s before final testing. Ammonit explains that this reduces initial bearing friction toward its steady-state level before calibration and field use, which is especially valuable for long-term wind-resource campaigns where calibration stability matters.
Additional information
| Models | P2546D-OPR |
|---|
